Corsair
Corsair Vengeance RGB Pro 16GB 3200MHz
Who this is for: builders after 16GB of DDR4 at 3200MHz for mainstream gaming and everyday productivity — it is aimed at builders who tune their systems and expect the kit to hold a manual profile. Because this is a single module, it runs in single-channel mode and gives up roughly half the memory bandwidth of a matched pair; for a new build, pair it with a second identical stick or buy a 2-module kit instead.
The Corsair Vengeance RGB Pro 16GB 3200MHz is a 16GB DDR4 single module rated at 3200MHz with CL16 timings.
At 3200MHz and CL16, the real-world payoff shows up in latency-sensitive gaming and everyday responsiveness, where DDR4 still holds up well. Corsair backs it with a lifetime warranty and iCUE support where lighting is present. Before buying, confirm your motherboard supports 16GB in the configuration you plan to run.
Technical Specs
Enthusiast-Grade
We may earn a commission from retailer links. This doesn't affect our rankings.
As an Amazon Associate I earn from qualifying purchases.
Available Vendors
Frequently Asked Questions
Will the Corsair Vengeance RGB Pro 16GB 3200MHz run at 3200MHz out of the box?
Not automatically. Every module boots at a JEDEC baseline first, so you need to enable the XMP or EXPO profile in BIOS to reach 3200MHz at CL16. If the system fails to post, clear CMOS and try one speed step lower.
Is 16GB enough for my build?
16GB is the minimum we'd suggest for a modern gaming build — it will run today's titles, but 32GB is the recommended sweet spot if you stream, run Discord and a browser alongside the game, or want headroom for the next few years. Note that this listing is a single module, so it runs in single-channel mode and gives up roughly half the memory bandwidth of a matched pair — for a new build we'd recommend a 2-module kit of the same total capacity instead.
What does CL16 actually mean here?
CL16 is the CAS latency: the number of clock cycles between a read request and the first data returned. Because 3200MHz clocks faster than older kits, the same CL number represents less real time. True latency in nanoseconds, not the CL figure alone, is what to compare.
Can I mix this with memory I already own?
You can, but it is not recommended. Mixing kits means the memory controller has to find settings that satisfy every module, so you usually end up below the 3200MHz rating. Buying 16GB as a single matched kit avoids that entirely.
Want the background behind these specs? Read our memory guides.