Kingston
Kingston FURY Impact 32GB SO-DIMM 3200MHz
Who this is for: builders after 32GB of DDR4 at 3200MHz for modern gaming, content creation and comfortable multitasking — it is a SO-DIMM upgrade for laptops and small form factor machines rather than a desktop kit. Because this is a single module, it runs in single-channel mode and gives up roughly half the memory bandwidth of a matched pair; for a new build, pair it with a second identical stick or buy a 2-module kit instead.
The Kingston FURY Impact 32GB SO-DIMM 3200MHz is a 32GB DDR4 single module rated at 3200MHz with CL20 timings.
At 3200MHz and CL20, the real-world payoff shows up in latency-sensitive gaming and everyday responsiveness, where DDR4 still holds up well. Kingston validates its modules across a wide list of motherboards before release. Before buying, confirm your motherboard supports 32GB in the configuration you plan to run.
Technical Specs
Laptop-Performance
We may earn a commission from retailer links. This doesn't affect our rankings.
As an Amazon Associate I earn from qualifying purchases.
Available Vendors
Frequently Asked Questions
Will the Kingston FURY Impact 32GB SO-DIMM 3200MHz run at 3200MHz out of the box?
Not automatically. Every module boots at a JEDEC baseline first, so you need to enable the XMP or EXPO profile in BIOS to reach 3200MHz at CL20. If the system fails to post, clear CMOS and try one speed step lower.
Is 32GB enough for my build?
32GB is the recommended amount for modern gaming and everyday content work — comfortable headroom for most builders without paying for capacity you won't use. Note that this listing is a single module, so it runs in single-channel mode and gives up roughly half the memory bandwidth of a matched pair — for a new build we'd recommend a 2-module kit of the same total capacity instead.
What does CL20 actually mean here?
CL20 is the CAS latency: the number of clock cycles between a read request and the first data returned. Because 3200MHz clocks faster than older kits, the same CL number represents less real time. True latency in nanoseconds, not the CL figure alone, is what to compare.
Can I mix this with memory I already own?
You can, but it is not recommended. Mixing kits means the memory controller has to find settings that satisfy every module, so you usually end up below the 3200MHz rating. Buying 32GB as a single matched kit avoids that entirely.
Want the background behind these specs? Read our memory guides.