Kingston FURY Renegade 32GB (2x16GB) 7200MHz - DDR5 Memory Chip
DDR5

Kingston

Kingston FURY Renegade 32GB (2x16GB) 7200MHz

Who this is for: builders after 32GB of DDR5 at 7200MHz for modern gaming, content creation and comfortable multitasking — it chases raw transfer rate and needs a capable memory controller and board to hit its rated profile.

The Kingston FURY Renegade 32GB (2x16GB) 7200MHz is a 32GB DDR5 dual-channel kit rated at 7200MHz with CL38 timings.

At 7200MHz and CL38, the real-world payoff shows up in bandwidth-hungry work such as 1% low frame rates on modern CPUs, code compilation and multi-track editing timelines. Kingston validates its modules across a wide list of motherboards before release. Before buying, confirm your motherboard supports 32GB in the configuration you plan to run.

View more DDR5 chips

Technical Specs

Capacity
32GB
Speed
7200MHz
Latency
CL38
Type / Capability
DRAM
Extreme-Performance
Starting atCheck current price
Indicative price, last reviewed Sep 27, 2026. Confirm the current price at the retailer.

We may earn a commission from retailer links. This doesn't affect our rankings.

As an Amazon Associate I earn from qualifying purchases.

Available Vendors

AmazonCheck price on Amazon
View
BestBuyCheck price
View
NeweggCheck price
View
Micro CenterCheck price
View

Frequently Asked Questions

Will the Kingston FURY Renegade 32GB (2x16GB) 7200MHz run at 7200MHz out of the box?

Not automatically. Every module boots at a JEDEC baseline first, so you need to enable the XMP or EXPO profile in BIOS to reach 7200MHz at CL38. If the system fails to post, clear CMOS and try one speed step lower.

Is 32GB enough for my build?

32GB is the recommended amount for modern gaming and everyday content work — comfortable headroom for most builders without paying for capacity you won't use.

What does CL38 actually mean here?

CL38 is the CAS latency: the number of clock cycles between a read request and the first data returned. Because 7200MHz clocks faster than older kits, the same CL number represents less real time. True latency in nanoseconds, not the CL figure alone, is what to compare.

Can I mix this with memory I already own?

You can, but it is not recommended. Mixing kits means the memory controller has to find settings that satisfy every module, so you usually end up below the 7200MHz rating. Buying 32GB as a single matched kit avoids that entirely.

Want the background behind these specs? Read our memory guides.